It is completely different to use a stand-up lift truck as opposed to a sit-down unit. The way you transport and lift cargo as well as your movements are completely different. If you do not have proper training for operating a stand-up unit, you could probably cause harm co-employees or to yourself. When operating a stand-up unit, you need to follow the proper safety rules. There are some basic operating standards that have to be met when using a stand-up model.
To start on a stand-up unit lift truck, it is vital to get a good feel for the steering knob and the controls. Rather than a steering wheel, the steering is handled using the knob steering plate. Remember that this knob moves exceptionally fast, hence, you need to get used to moving it carefully in order to be sure not to over steer. The horn is located on the control handle, like with the control for forwards, backwards and the fork movement. The floor pedal enables the machine to move.
When you are ready to start, turn the key to start the forklift. Be sure that your forks are retracted. If you are moving all-over the floor, the forks should be pointed slightly upwards. Never drive with the forks in their extended position. If you are moving forward, move the control handle forward and step on the pedal to make the lift move forward. If you are backing up, be certain to beep your horn in order to alert individuals around you. Look behind you before stepping on the pedal in order to make sure the path is clear and safe. Then, pull the control handle towards you while stepping on the pedal. Always stay alert and focused and make sure that you are always operating in a safe manner.
When it comes to turning corners, turn your steering knob in the direction you need to go while keeping your hand on the control handle and your foot on the power pedal. When turning right, the steering knob would move in a clockwise direction during forward travel. If you are turning left, your steering knob will go in a counter-clockwise direction.
If you have only utilized sit down models, the stand-up versions can take some getting used to. With some training and taking some time to figure out the equipment, you could handle loads efficiently and quickly in little time.