It is really vital to utilize extra care when utilizing a rough terrain scissor lift. Operators should be completely aware of the surrounding environment. Extended booms on the equipment act as levers from the center of the drive unit. For instance, a 6 inch bump can lead to a 3 foot bounce when the driver is at the driver controls. Consider all other traffic in the vicinity, since they might not be aware that you are moving. Plan your assent cautiously. Park the boom lift on a flat surface that has no water or mud. These areas cover deep potholes which can be possibly cause the occupants to fall if the tires fell into the holes. If provided, use all of the outriggers, extended to their full extension position. Be certain to only utilize wooden chalk blocks which are approved.
Lots of lifts operate from a metal platform on the end of the boom. The long booms act as levers from the drive unit's center. A 6-inch bump can result in a 3-foot bounce while you are at the driver controls. Consider all other traffic. They may not know that you are moving. Plan your assent. Park the boom lift on a flat surface free of any water or mud. These areas can cover deep potholes in which the lift tires could fall, tipping the occupants. Extend all outriggers, if provided, to the full extension position. Place only approved wooden chalk blocks beneath the outrigger pads in order to prevent the unit from moving.
Overhead power lines are a serious danger for lift operators regardless of what lift is being used. For instance, if the platform operator is not being aware, or if the platform is being controlled by ground employees that is not able to correctly access proximity to wiring and thus, either the platform itself or the worker could be easily brought into contact with electrical wires. The employee can be electrocuted unfortunately unless correctly insulated.